The discussion regarding the 3D elevation design brings forward the enthralling designs of the high-rated product known as CLAD-EX 3D wall panels. The discussion is even more important, given the elevation of the front facade says a lot about the taste of art and aesthetics of the house owners. In addition, one always dreams of having a home which speaks by its design and building material, when it comes to beauty and artistic definition. The CLAD-EX 3D wall panels are excelling in 3D elevation design, giving the architects the option to use them in the building elevation of the projects they are working on. This was not the case, years back!
Given this fact, that 3D elevation design is in rising demand, these days many companies are producing different kinds of products for elevation of the buildings. Today, we take you through some of these products. Read on, for more information on them.
The high pressure laminates are 6 to 8 mm compressed laminates, used by some architects in the building elevations. They come in a finished form in woodgrain and solid colours, but after a certain point of time their colour starts to fade. On an average, the high pressure laminates start bulging and bending after 3 years. This means, that they are not durable products which could stay intact in their shape and form for a long period of time. The 3D elevation design does not change again and again on a short span of time, so it would be better to select a durable and promising alternative to it.
The Fiber Cement Planks are heavy in weight and brittle in nature. They are available in wood-grain form and can be coloured in the desired colours and patterns. Being heavy in weight, they increase the weight of the building; in addition their installation is a very tedious process.
The Slim Tiles are also referred as Aluminium, where no further surface treatment is needed on the elevation design . The only thing which can hurt a consumer while purchasing it for their house or office is that, these are very expensive. So, they weigh very heavy on the pocket when a customer selects them for the application of the 3D elevation design .
Epay wood is also known as Brazilian wood. Their major advantage is that their application gives a wooden look to the residential villas. In order to maintain their gleam and sheen of the elevation design by using the Epay Wood, the customer needs to get it polished and re-waxed after every 2 years. If the customer is ready to work on the elevation design after every 2 years, then this could be a choice, otherwise not!
The elevation design that can be achieved through the Aluminium Composite Panel is very commercial in nature, and is mostly used by companies and offices. Their elevation design doesn’t suit the residential villa, so this keeps them bound to only use in the commercial spaces. Another point in their installment is, that their color fades after a period of 4-5 years. They start bulging from the joints as well.
Having talked about the elevation design available in the market, there is the need to study the points about CLAD-EX 3D Wall Panels from Ecoste Wood Polymer Composite.
The 3D wall panels from Ecoste give a 3 dimensional look to your existing front 3D elevation design . This further adds a greater aesthetic value to your establishments, both the residential and commercial spaces. The CLAD-EX 3D wall panels are made with special polymers, which makes the products resistant to warping. In addition, they are 100% paintable and are available in 15 elevation design . Their thickness is 5 mm and they are available in a panel size of 4Ft * 8Ft. The 3D wall panels are 100% termite proof, water proof and fire retardant. Ecoste provides life-time guarantee on the same qualities as well.
Hence, customise your 3D elevation design using CLAD-EX 3D Wall Panels from Ecoste. Let your house speak volumes about your taste of designing and aesthetics. If you have any queries then feel free to reach the customer support team of Ecoste, by dialing the number (+91) 9555075075 or by mailing us at contact@ecoste.in!